Curvature MiniWedge is a passive 2-way stage monitor of high quality and very compact. It is built in 15mm birch plywood and protected against moisture with textured paint. It incorporates two angles of use to increase its versatility and also vessel for tripod.
It has a hanging point M10 at the top. Assemble an 8 “(200mm) low frequency unit with anti-humidity treatment and magnetic neodymium group in a bass reflex box tuned to two low turbulence ports.
For the high frequencies in the Curvature Miniwedge a compression motor of 1.4 “(35mm) of diameter of coil with titanium membrane is used. This transducer is coupled to a horn built in glass fiber and with a dispersion of 60 × 60º.
Mounts an oversized filter with coils and capacitors of the highest quality. It incorporates 3 speakon connectors in parallel to offer maximum possibilities of connection in any position.
It is possible to combine it with Sub Curvature III of active form, to obtain an extension of the low frequencies until the 40hz
- Stage Monitor
- Very compact and lightweight
- High Performance Near Field Monitor
- Passive 2-way monitor
- Double angulation for improved versatility
- Hanging point M10
- Parallel Connectors
- Sound reinforcement in theaters or small spaces
Frecuency Response: 75Hz-20Khz Power Handling: 400W RMS Sensitivity (1W/1M): 95 dB SPL Máx: 125 dB Dispersion: 60º Horizontal
Nominal Impedance: 8 ohms Drivers: LF 8″
HF 1″ Compression Driver
Crossover: 1.8 Khz Input Connections: 3x Speakon NL2 Rigging: Hanging point M10 Enclosure Shell: Birch (15mm) Enclosure: Black Epoxy Dimensions (mm): 400x220x250 Weight: 10 kg
- Documentation Curvature Miniwedge